LIFT ARM AND STABILIZER

LIFT ARM AND STABILIZER

94 products

Showing 49 - 72 of 94 products
View
KIT, CHAIN AND PIN
TISCO - DASH KIT, CHAIN AND PIN SKU: CBPN598A
Check Chain Kit. Contains, 11-1/2" chain, two clevis with pins, cotter pins.
$11.70
 In stock, 49 units
STAB KIT L BRKT
FNB c/o GRIPWEL FASTENERS STAB KIT L BRKT SKU: CFPND936B-LB
Single chain assembly. Does not include brackets or U-bolt. Tractors: 5000, 7000 (1965-1975), 5600, 6600, 6700, 7600, 7700 (1975-1981), 5610, 6610, 6710, 7610, 7710 (1981 & up).
$105.34
 In stock, 12 units
KIT, DRAWBAR CHECK CHAIN
TISCO - DASH KIT, DRAWBAR CHECK CHAIN SKU: DCK1
Drawbar Check Chain Kit. Contains, two anchors, two eyelets, two chains, four clevis with pins and hardware.
$44.30
 Sold out
STABILIZER PIN
O.J. MACHINE WORKS STABILIZER PIN SKU: C5NNN873A
Stabilizer bracket pin. 3-3/8" overall length, 7/8" diameter, 1/2" useable shaft, 5/8" NC, 1-7/8" thread length.
$8.53
 In stock, 240 units
LEFT HAND STABILIZER ARM
FNB c/o GRIPWEL FASTENERS LEFT HAND STABILIZER ARM SKU: C5NNN455C
Link, stabilizer, LH. Cat. I only. Tractors: 2000, 4110 (1965-1975), 3000 (except 3550, 11/1970-1975), 2600, 3600 (1975-1981).
$53.76
 In stock, 15 units
RIGHT HAND STABILIZER ARM
FNB c/o GRIPWEL FASTENERS RIGHT HAND STABILIZER ARM SKU: C5NN454C
Link, stabilizer, RH. Cat. I only. Tractors: 2000, 4110 (1965-1975), 3000 (except 3550, 11/1970-1975), 2600, 3600 (1975-1981).
$55.11
 In stock, 17 units
LEFT HAND STABILIZER ARM
FNB c/o GRIPWEL FASTENERS LEFT HAND STABILIZER ARM SKU: C5NNN455B
Link, stabilizer, LH. Cat. I & II. Tractors: 3000 (except 3550, 1965-1975), 2600, 3600 (1975-1981), 4100, 4600SU (rigid - 1975-1981), 2610, 3610 (1981 & up), 4110, 4610SU (rigid - 1981 & up).
$60.42
 Only 2 units left
RIGHT HAND STABILIZER ARM
FNB c/o GRIPWEL FASTENERS RIGHT HAND STABILIZER ARM SKU: C5NN454B
Link, stabilizer, RH. Cat. I & II. Tractors: 3000 (except 3550, 1965-1975), 2600, 3600 (1975-1981), 4100, 4600SU (rigid - 1975-1981), 2610, 3610 (1981 & up), 4110, 4610SU (rigid - 1981 & up).
$60.42
 In stock, 18 units
STABILIZER ARM ASSEMBLY
FNB c/o ARIKAN DIS TICARET STABILIZER ARM ASSEMBLY SKU: D9NNB856BB
Stabilizer arm assembly less brackets and U-bolts.
$67.72
 Sold out
STABILIZER ARM - LEFT HAND FOR FORD
FNB c/o GRIPWEL FASTENERS STABILIZER ARM - LEFT HAND FOR FORD SKU: SKA6251
Stabilizer Arm Left hand arm only for SK23-6X. Fits Fod 2000, 3000. 7/8" hole diameter. Made of 3/8" x 2" heat treated high carbon steel; 31-5/8" centers.
$25.10
 Only 2 units left
RED STABILIZER KIT
TISCO - DASH RED STABILIZER KIT SKU: 231253XHD
Complete kit. Extra heavy duty, using stabilizers, arms of alloy spring steel. Red.
$98.03
 In stock, 8 units
STABILIZER ARM - RED 31-1/2" CENTER TO CENTER
FNB c/o GRIPWEL FASTENERS STABILIZER ARM - RED 31-1/2" CENTER TO CENTER SKU: 230042R
$0
 Sold out
STABILIZER ARM - BLUE 31-1/2" CENTER TO CENTER
FNB c/o GRIPWEL FASTENERS STABILIZER ARM - BLUE 31-1/2" CENTER TO CENTER SKU: 230042B
$0
 Sold out
BALL SOCKET
FNB c/o GRIPWEL FASTENERS BALL SOCKET SKU: SBJ1
Top Link Ball Socket, Cat 1&2, Standard Duty, 3/4"&1" ID, 1-1/2"&1-1/4" bore length, 7/8" sleeve width, 2-3/8" OD, Black Oxide finish.Weld-on combination ball joint. For 3/4" or 1" pins. Category I or II.
$28.57
 Only 3 units left
SPRING ASSEMBLY
FNB c/o SPENCO ENGINEERING SPRING ASSEMBLY SKU: C5NNN557B
Spring, ball retainer. For dual-category lift arms.
$1.81
 In stock, 35 units
LIFT ARM
FNB c/o GRIPWEL FASTENERS LIFT ARM SKU: D0NN555CLH
Lower lift arm, LH, 5160 steel. 32" hole centers. Same application as D0NN555DRH.
$104.90
 In stock, 13 units
LIFT ARM
FNB c/o GRIPWEL FASTENERS LIFT ARM SKU: D0NN555DRH
Lower lift arm, LH, 5160 steel. 32" hole centers. Same application as D0NN555CLH.
$108.07
 In stock, 44 units
32 INCH CAT 1 LOWER LIFT ARM WITH FORGED BALL JOINT ENDS - RED
FNB c/o GRIPWEL FASTENERS 32 INCH CAT 1 LOWER LIFT ARM WITH FORGED BALL JOINT ENDS - RED SKU: JSA1002R
Category 1 accommodates 7/8" drawbar or lower link pins.Replacement for Ford 9N555B right or left.For black version, order 873-LA335HT
$77.34
 In stock, 14 units
BUSHING LIFT ARM
O.J. MACHINE WORKS BUSHING LIFT ARM SKU: 180859M1
Bushing, for lift arm eyebolt assembly 180856M1. 7/16" ID, 5/8"OD, 1-1/2" long.
$2.64
 In stock, 802 units
EYE BOLT KIT
TISCO - DASH EYE BOLT KIT SKU: CEK4
Lift arm eyebolt kit. Contains eyebolt assembly with bushing and nut.
$13.33
 Sold out
NUT SPEC HEX
PRODUCTION MATERIAL INC NUT SPEC HEX SKU: 186809M1
Special hex nut, stabilizer pin.
$0.44
 In stock, 316 units
LIFT ARM BUSH
O.J. MACHINE WORKS LIFT ARM BUSH SKU: 491050M2
Stabilizer bushing.
$3.46
 In stock, 7 units
STABILIZER PIN KIT
TISCO - DASH STABILIZER PIN KIT SKU: PLSK65
Stabilizer pin kit. Contains pin, bushing and special nut.
$0
 In stock, 21 units
STABALIZER PIN
FNB c/o GRIPWEL FASTENERS STABALIZER PIN SKU: P7065
Stabilizer pin. 5/8" fine threaded end, 7/8" pin end with 1/2" working area. Use nut 353427X1 and 34811S36 lock washer.
$8.53
 In stock, 26 units

Recently viewed